PC Welt 2000 October

home *** CD-ROM | disk | FTP | other *** search

/ PC Welt 2000 October / PC-WELT 10-2000.ISO / software / boot / PCWBOOT.EXE / QVIEW / DOC_ENG / QVIEW.DOC < prev next >

Wrap

Text File | 1998-06-26 | 65.7 KB | 1,373 lines

┌────── ┌────── ┌────── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌───────── ┌── ┌─── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌── ┌─────── ┌─────── ┌──── ┌──── ┌───── ┌──── ┌─ ┌─ ┌───── ┌───── ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌──── ┌──── ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌─ ┌───── ┌──── ┌───── ┌───── ┌─ ▀▀▀▀▀▀\ ▀▀\ ▀▀\ ▀▀▀▀▀▀▀\ ▀▀▀▀▀▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀▀▀▀▀▀\ ▀▀\ ▀\ ▀▀\ ▀▀\ ▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\ ▀▀\▀▀▀\▀▀\ ▀▀▀▀▀▀\ ▀▀▀▀▀\ ▀▀▀▀▀▀▀\ ▀▀▀▀▀▀▀\ ▀▀\ ▀▀\ ▀▀\ Release 2.69.03 26 June 1998 Is devoted to ... ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Product support and distribution ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ┌──────────────────────────────────────────────────────────╖ │ Welcome to the echo-conference QVIEW.SUPPORT in Fidonet! ║ ╘══════════════════════════════════════════════════════════╝ This program is freeware, so you may feel yourself free to use and/or distribute it but no purcase! If you want to make the mony with the help of this program please contact us to solve this problem. ~ In the Internet there fido7.qview.support newsgroup could be found via NNTP. Sorry, it's mostly russian speaking, but if you write english you may expect to get an answer on english. Other languages aren't supported, sorry. ~ For the Fidonet users the latest version of QView is a file requestable at 2:5030/445 by the alias QVIEW. ~ It also could be found in Internet (refer file qview.url). ~ Shall be grateful, if you can spread fresh versions of QView in the Fidonet and/or Internet. Just inform us where you put them, please. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Table of contents ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ 1. Main features. 2. System requirements. 3. Video modes. 4. Status line. 5. String search, search with replace. 6. Assembler search. 7. Jumps, tracing, FAR-calls. 8. A few words about the internal disassembler. 9. Block operations. 10. Bookmarks. 11. Calculator. 12. Crypt-system. 13. Basing. 14. Views-history file and its dialog. 15. Configuration files qview.ini, qview.ehl, qview.fmg. 16. Help file qview.hlp. 17. User character table redefining file qview.chr. 18. Mouse support. 19. .CRK file support. 20. The comments for the instructions in AV support. 21. Editing of a file in a text mode (TV). 22. Extra service functions. 23. Controll keys. 24. Command-line options and start-up. 25. A lot of thanks. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Main features ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ■ Viewing/editing files of unlimited size in txt/hex/asm modes: TV,HV,AV. ■ Viewing/editing of first mbyte of memory. ■ Viewing/editing of logic disks. ■ Viewing/editing of physical disks. ■ Viewing boot record of logic disks and FDD. ■ Viewing master boot record physical HDD. ■ Highlight of fields for HV, AV and text in TV. ■ Support of viewing of the text in the Alt, Win and KOI-8 encodings. ■ Auto detection of LineFeed for a file and on-fly change of it (TV). ■ Full-file editing in an AV mode in codes and on the assembler i486. ■ Full-file editing in an HV mode in a hex/ASCII kind. ■ Changes saving as .CRK-type file. ■ Current file update with the .CRK-type file information. ■ Creation of a new file, file append and truncate features. ■ Opening a file from the viewer (built-in file manager). ■ Support of MS-DOS 'MZ' executable files header. ■ Support of Windows 95/NT 'PE' executable files header. ■ Support of Windows,OS/2,DOS 4 etc. 'NE' executable files header. ■ Support of OS/2 'LX' executable files header. ■ Support of Windows 95 'LE' executable files header. ■ i80486/87 powerfull disassembler. ■ Commenting a file (instructions) in an AV mode. ■ Basing a start of a file. ■ Support of jumps on jmp/call/loop.../j... etc. in disassembler. ■ Serach of any i486/87 commands; search mask is allowed. ■ Search of jumps/calls/pointers on the current offset (AV). ■ Search of ASCII/hex [sub]string with an optional mask and case sensitivity. ■ Search of ASCII/hex [sub]string with a replacement. ■ Jump on offset in HV, AV. ■ Saving the block from a file on a disk as Code/Dump/Assembler. ■ Reading the block from a disk to a file as Code. ■ Deleting/inserting the block from/to a file. ■ Inserting a zero-bytes block to a file. ■ Deleting the block of bytes from a file. ■ Function of code conversion of the current file in a TV mode. ■ Powerful crypt-system for change of a file on complex algorithm. ■ Built-in calculator. ■ 9 bookmarks for each viewing mode. ■ The context-depended help system. ■ Automatic conducting a history of viewings file. ■ History of viewings file browsing window for the fast'n'easy file managment. ■ Redefinition of a viewer built-in colours and other setups. ■ Support of video modes such as 80*25, 80*30, 132*25, 132*30, etc. ■ Mouse support. ■ Multitasking friendly. ■ Memory requirements of about 90 Kb RAM. ■ External setup for the binary config control. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ System requirements ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Program requires: CPU: 386+ Video: VGA+, MDA, Hercules, CGA, EGA DOS: MS DOS 3.3+ (4.0+ for disk view routines) Memory: ~90 Kb P.S. Video: no snow checking. P.P.S. Also works well both in OS/2 and in Windows95 DOS sessions. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Video modes ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Are supported: 80*25, 80*30, 80*50, 132*25, 132*30 etc., i.e. all known text video modes. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Status line ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ─────────────────────────────────────────────────────────────────────────────── [] Filename.ext YYYYYYY xxxxxxxx --------- 00 M ▐ QView 2.60▐ AGC Products ─────────────────────────────────────────────────────────────────────────────── └────┬─────┘ └──┬──┘ └──┬───┘ └───┬───┘ └┤ └───────┐ └─┬┘ │ File Current Bookmarks First │ A basic │ size offset (unique for column in │ version │ in bytes (Hex) each view the text │ of QView │ (Dec) mode) mode (Hex) │ Name of a │ viewed file Line editor mode ──────┘ (I-Ins, O-Overide) See also 'Mouse support' ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ String search, search with replacement ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Search works with the whole file from the current position either to the beginning (Backward) or to the end (Forward) of a file. Optionally the case sensitive mode may be used. Default is off (both english and russian letters are supported). If text is entered in the hex input field, the case sensitive flag is ignored - the case sensitive mode is used in that case. You may enter the searchstring in ASCII as well as in hex mode and switch between them (<tab>,<up>,<down> keys). If the 'Masking' option is on, the '?' character is accepted as mask symbol and shown as '??' in the hex field and as '?' in the ASCII one. When masked search is used, the '?' symbol in searchstring should be used in place of the variable characters. If you enter something like 'one ?y?e', the result of search may be 'one byte' as well as 'one type', etc. If you enter 'B4 ?? CD 21' the result may be either 'B4 3F CD 21' or 'B4 40 CD 21', etc. There is an opportunity to enter the assembler instruction. After you've pressed Enter key, your instruction is assembled and returned code's placed to the search fields. Press Enter key then to start search. Wnen searching in the non-cp866 files, you may use the search with a cur- rent character table support ([F6]). Σπ¡¬µ¿ε »«¿ß¬á ó ΓÑ¬πΘÑ⌐ ¬«ñ¿α«ó¬Ñ ([F6]). àß½¿ ß««ΓóÑΓßΓóπεΘ¿⌐ Σ½áú ßíα«ΦÑ¡, Γ« »«¿ß¬ ¿ñÑΓ ó DOS (cp866) ¬«ñ¿α«ó¬Ñ, Γ.Ñ. óóÑñÑ¡¡δÑ óá¼¿ ß¿¼ó«½δ ó »«ñßΓα«- ¬Ñ »«¿ß¬á ¡Ñ »αÑ«íαáºπεΓß∩ »α¿ »«¿ß¬Ñ ¬ ΓÑ¬πΘÑ⌐ ¬«ñ«ó«⌐ Γáí½¿µÑ. By search in the files which have been written down in other coding, it's possible to use function of search in the current coding ([F6]). If this flag is reset (unchecked), the search runs in DOS (cp866) coding, i.e. the entered substring will not be recoded by the search engine to the current code table. This is unuseful when searching for 0-127 ASCII characters. Keys: F1 - Help - help F2 - Assembler - accept assembler instruction F4 - Case sensitive - case [in]sensitive mode F5 - Use mask - search with[out] masking F6 - UseCharSet - search with a current character table use F7 - History - searched strings history F9 - Direction - search forward/backward Enter - start - start search Esc - exit - exit from dialog (skip search) The history dialogue is consist of the records from the QVIEW.SRH file, where the last searched substrings are stored. The last entered substring is pushing to the top of the stack. The size of history this stack is limited to 32 records, and the oldest record is missed on stack overflow. Control keys: Up, Down goto the previous/next record F8, Del delete the current record F10 clear the history file Enter pick up the current record from the list Esc exit from the dialog (return no substring) Note: it is possible to forbid conducting a file of a history in QVIEW.INI. The search with replacement is caused on Ctrl+F7 and differs from all above stated by that on Enter we are sent on input of a replacing line, and also by the absence of a choice of a direction (always forward). ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Assembler search ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Works in the disassembler mode. Start : [F6] Continue : [Shift]-[F6] On pressing [F6] there is a following dialogue: ╔══════════════════ Assembler search ══════════════════╗ ║ ║ ║ ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ ║ ║ ║ ║ Step: Command Area: File Offs: Begin Type: Full ║ ║ ~~~~ ~~~~ ~~~~ ~~~~ ║ ╚══════════════════════════════════════════════════════╝ 1. Step - step of search - use [F2] to change 'Command' - search by instructions (commands) 'Byte ' - search by 1-st byte (slowly, but more faithfully) 2. Area - the area of search - use [F3] to change 'File ' - search on the whole file 'Block' - search in the block 3. Offs - offset - use [F4] to change 'Begin ' - search from the file (block) beginning 'CurOfs' - search from the file (block) current position 4. Type - search type - use [F5] to change 'Full ' - search for all substring entries, i.e. if you simply type 'MOV' - the all instructions of 'MOV x,y' form will be found. Also if you type 'MOV AX,$FE' - the all instruction 'MOV AX,00FE', 'MOV AX,FE12', etc. will be found. If 'XOR ?X,BYTE PTR [SI' substring is entered then 'xor ax,byte ptr [si+1000]', 'xor cx,byte ptr [si]', etc. instructions will be found. 'Small' - exact search, i.e. when 'mov *,$1' is entered the view- er will found the 'MOV SI,0001', 'MOV Cl,01','MOV DWORD PTR [BX+SI],00000001', etc. instructions. But if there would be '10' in the end of the last instruction, it wouldn't be found. 5. Syntax used in a mask. Use the common assembler syntax for the instructions and operands. The case of the letters has no importance - use it as you prefer. Don't insert the unnecessary spaces - the viewer does not process them. Don't forget about the type reduction - 'byte ptr' - is a 2 words! Feel yourself free to use the mask if you are too lazy to type them. Mask symbols: '?' - any one symbol (byte); '*' - any substring up to a comma or end of a string; '$' - use it befor the numeric constant to force the viewer to skip a leadind noughtes; '%' - any word (up to a space, comma or end of a string); '@' - substring of search. Examples: ┌─────────────────────────────┬──────────────────────────────────────┐ │ 1. 'mov ?s,ax' │ 'mov es,ax' │ │ │ 'mov ds,ax' │ ├─────────────────────────────┼──────────────────────────────────────┤ │ 2. '*,$1' │ 'mov ax,0001' │ │ │ 'cmp byte ptr [ebx],01' │ │ │ 'shl dx,01' │ ├─────────────────────────────┼──────────────────────────────────────┤ │ 3. '% % ptr fs:[e?x+$14],*' │ 'cmp byte ptr fs:[eax+14],01' │ │ │ 'mov dword ptr fs:[ebx+00000014],esi'│ ├─────────────────────────────┼──────────────────────────────────────┤ │ 4. 'l?s *,*' │ 'lds si,word ptr [1980]' │ │ │ 'les eax,dword ptr [ebx]' │ ├─────────────────────────────┼──────────────────────────────────────┤ │ 5. '@bx*,*' │ 'mov bx,5092' │ │ │ 'xor word ptr [bx+si],ax' │ ├─────────────────────────────┼──────────────────────────────────────┤ │ 6. '@[bx+si+1024]* │ 'test word ptr [bx+si+1024],5092' │ │ │ 'xor byte ptr [bx+si+1024],al' │ └─────────────────────────────┴──────────────────────────────────────┘ ~ Use you imagine :-) 6. Search for jumps/calls/pointers on the current offset - [F6] - Reference 7. Search dialogue - [F7] The history dialogue is consist of the records from the QVIEW.SRA file, where the last searched substrings are stored. The last entered substring is pushing to the top of the stack. The size of history this stack is limited to 32 records, and the oldest record is missed on stack overflow. Control keys: Up, Down goto the previous/next record F8, Del delete the current record F10 clear the history file Enter pick up the current record from the list Esc exit from the dialog (return no substring) Note: it is possible to forbid conducting a file of a history in QVIEW.INI. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Jumps, tracing, FAR-calls ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ The program contains a set of functions for simplification and increase of efficiency of your work. 1. Go to offset ([F5]). In HV and AV modes it's allowed to enter the new offset and then to go to it. It is possible to pick up the offset from the history list - on [F7]. 2. The advanced 'goto' ([Alt]+[G]). HV, AV: For memory and files is similar to simple 'goto' ([F5]), for the viewing of logic disks mode - transition to sector, ... of physical disks - transition to physical sector. TV: go to a line number (depened of current LineFeed). 3. In a disassembler mode (AV) you can follow links (j*,loop*,call), marked with the figures in brackets to the left of the appropriate commands of the assembler. Management: [Shift]+[1]...[Shift]+[9] - transitions [Shift]+[0] - return (no recurrence - use bookmarks) 4. A dump viewing (HV) call with an offset under the cursor in AV on [Alt]+[J],[W] if 16-bit addressing mode is assumed or [Alt]+[J],[D] if 32-bit addressing mode is. Return from HV to AV on a position of a call on [Alt]+[J]. The meaning of this function becomes clear from the following example: 1. AV: 000009A2: BA170B mov dx, 0B17 ^^ here is the cursor in AV befor the call; [Alt]+[J],[W] 000009A5: B409 mov ah, 09 000009A7: CD21 int 21 2. Automatically we get in HV on the following fragment: 000B17: 0A 0D 43 41│4C 43 20 5B│2F 3F 5D 5B│2F 73 5D 5B ..CALC [/?][/s][ 000B27: 2F 2A 5D 0A│0D 24 20 20│20 20 20 2F│73 20 2D 20 /*]..$ /s - Here we jump as we want to, and then use [Alt]+[J] to come back in AV on the point 1. 5. It is possible to call a FAR-procedure in the viewed file from the cursor in an AV mode on [Alt]+[C]. The program's screen is swapped out at start of procedure, then the user screen is restored and the procedure started. On exit from this procedure the program's screen is restored. The super- vision of work is not provided. Purpose: debug of the short programs, for example: mov al,2Eh; out 70h,al; jmps $+2; out 71h,al; retf. See also: 'Bookmarks', 'Mouse support'. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ A few words about the internal assembler ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Generally, the assembler syntax is the same as one of the disassembler. Do not forget about type reduction where needed, but generaly defaults are used. For the jumps - 'short','near',etc. are absent as a class, the FAR defaults or the 'byte (word, dword, pword) ptr' constructions are used (so 'byte' for 'short', 'word(dword)' for 'near', 'pwrod' for 'far'). ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Block operations ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ All common block operations are supported. [Shift-F2] - write marked block to the file (HV,AV) [Shift-F3] - read block from a file to the marked block (HV,AV) [Shift-F4] - delete marked block (HV,AV) [Shift-F5] - insert block from a file to the current position (HV,AV) [Ins] - mark the start/end of the block, clear marks (HV,AV) [Ctrl-F4] - insert block of 0h-bytes at the current position (Text,HV,AV) [Ctrl-F5] - delete block of bytes from the current position (Text,HV,AV) [Alt-A] - mark the whole file as a block [HV,AV] 1. At writing a block there is a following dialogue: ┌────────────────────────── Write block to file ─────────────────────────┐ │ │ │ Block : Begin : 00000000 End : 00000000 Length : 00000000 │ │ │ │ File : ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │ │ │ │ Offset: ░░░░░░░░ Save as : (*) Code ( ) Dump ( ) Assembler │ │ │ └────────────────────────────────────────────────────────────────────────┘ 1.1. First line is the block parameters (start, end, size). 1.2. Use [Tab] to switch between the dialogue fields. 1.3. Use [Enter] to write a block, [Esc] to cancel operation. 1.4. Use [Space] at ( ) Code, ( ) Dump or ( ) Assembler to set the type of the output. 1.5. 'Offset' is the offset in the output file to start writing at. By default 0 is assumed. If the offset is greater than the file size, the block will be appended to the end of the file. Use the FFFFFFFFh offset to write a block to the end of file (i.e. to append a block) for sure. 1.6. In the Dump mode the filter is used for the output: 00-31 ASCII symbols are skipped. 1.7. In the Assembler mode the assembler listing is written. 2. When reading a block from a file, if the number of bytes from Offset to the end of the input file smaller than the marked block size the "Illegal off- set in file" message is appeares. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Bookmarks ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ You may use bookmarks to store the current position and then easily resto- re it. [Alt]+[+] stores the current position, [BS] restores one of the current bookmark and so on. For each view mode (text/hex/asm) there are 9 bookmarks may be used. Use [Alt]+[1]...[Alt]+[9] to restore any of the stored position. [Alt]+[+] - store the current position [BS] - go to the current bookmark's position [Alt]+[1]...[Alt]+[9] - go to the position of the bookmark number 1..9 [Alt]+[-] - clear (remove) the current bookmark [Alt]+[0] - clear (remove) all bookmarks ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Calculator ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ The powerfull calculator with the complete set of the arithmetical and logical functions is built-in. Use Ctrl-[F6] to call the calculator. You may use four modes to input the expression in: Dec, Hex, Oct, Bin. Also you may force the type reduction by typing the one of the next symbols at the end of the numbers: d - Dec, h - Hex, o - Oct, b - Bin. All numbers are represented by double word (32 bits). Operations with an equal priority are normally performed from left to right. Expressions within the parentheses are evaluated before being treated as a single operands. Operation precedence (priority): ┌─┬──────────────────┬───────────────────────────────────────────┐ │1│ (, ) │ parentheses │ │2│ ~, - │ not, unary_minus │ │3│ <<, >> │ shl, shr │ │4│ *, /, %, &, |, ^ │ mul, div, mod, and, or, xor │ │5│ +, - │ add, sub │ └─┴──────────────────┴───────────────────────────────────────────┘ Note: a highest level of a priority is 1 Keys: F2 - Dec default F3 - Hex default F4 - Oct default F5 - Bin default Enter - Evaluate Esc - Exit ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Crypt-system ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ On my point of view, the compilers-interpreters programming is an ungrate- ful task. Besides that it is requires a sizeable memory resources, etc. I have analized known crypt-systems such as one in Hiew, Proview and others (let's de- fine the crypt-system as an automatical or semi-automatical mechanism of a file editing) and have found all of them too narrow-featured for the real hacker. So I've choosen my own way. Ofcause, there are also some limits in my program, but it has a wider potentialities than the others. But any coin has two sides, and the reverse side is that the clearness and control of the crypt-system work are lost. But to my mind it is a low price for the great inherent potentialities - just be carefull and everything will be Ok! So: 1. Crypt-system works with a marked block up to 64000 bytes of size in the normal mode, so don't forget to pick up the block to be crypted. 2. Crypt is a FAR-procedure called by a viewer, so don't forget to add the RETF instruction to the end of it! 3. Viewer transfers the parameters to the crypt procedure through the registers: DS:SI - start address of the block to be crypted CX - size of the block to be crypted ES:DI - the area of the crypt procedure 4. All i486 instructions are allowed in the crypt procedure. 5. Viewer doesn't supervise the work of the crypt procedure. Do not forget to pop up all data pushed to the stack! So, take care of the crypt procedure correctness - I leave it to you. 6. The maximum code and data size of the procedure is 1024 bytes. Use the DataOffset field to change the code and data correlation. The data area from the DataOffset up to the 1024 bytes is fixed, so you may directly access this area. It holds the crypt procedure local variables, tables, etc. Assembling is maked into the code area. Program length is limited up to 200 lines. Control keys: Up, Down Move up/down Right, Left Move left/right Alt+F1 Assembler editor mode: insert/override F1 Help F2 Save crypt file F3 Load crypt file F4 Crypt procedure data section offset F5 Go to offset F6 Erase crypt procedure F7 Clear crypt procedure data section F8 Delete current instruction F9 Run crypt procedure TAB Toggle assembler/data editor ENTER Assemble instruction ESC Exit without crypting and so on... ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Base ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ You may change the base (initial) address of the program. It's may be use- ful when you need to define the start address for the .COM as 100h or to point the offset of some command to the desired address. In that case you may define the special constant - address base, that is automatically added to the Offset and the jump-addresses. To call the dialogue use Ctrl+F2. Control keys: Up, Down Move up/down Tab Next record F1...F8 Select 1..8 base Enter Select current base F10 Clear program base VA ESC Abort operation Base symbols: '+','-' Sign of the base constant '*' Auto-change the current offset to the constant after '*'. So when needed to redefine the current offset, e.g. 1893h, to the new one, let's say 200h, then just type *200h. Note: the dialogue may be also called with a mouse (see 'Mouse support'). ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ File of a histiry of viewings and its dialog ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ The history file stores the information about the viewed files such as the current file offset (note: if the size of the file was chanched since the last view, the 0 offset is accepted), LineFeed, view mode, Wrap/Unwrap status, both standard and assembler search options (but not the searched substrings itself), bookmarks. When you call the same file to view again, all these settings are restored from the history file. The history file is logged automatically and one on all the viewed files. The history file is located in the same directory that the QView is. The histo- ry file is updated on exit from the QView. The size of this file is limited up to a 32 records. The views history dialogue allows the record deletion and fast'n'easy file management. Use [Alt]+[F7] to call this dialogue box. Control keys: Up, Down goto the the previous/next record F8, Del delete the current record F10 clear the history file Enter pick up the current record from list Esc exit from the dialogue (return no substring) Extra managment of the history of vieweings file available. You can browse this history file loading previously viewed files in order they stored in list. Control: Ctrl+Tab loads the next file from the views history list Shift+Tab loads the previous file from the views history list Note: it is possible to forbid conducting a file of a history in QVIEW.INI. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Configuration files ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ N.B. Q-Setup program exist to help you to configure the viewer as you prefer. Q-Setup works in interactive (menu) mode. Refer the q-setup.doc for the details. ╓─═ QVIEW.INI ═══─────────────────────────────────────────────────────────────╖ ~~~~~~~~~ 1. Configuration file: Name : QVIEW.INI Size : 87 bytes Type : optional (the defaults are used if absent) Description : Default colors and options override Location : with QVIEW.EXE 2. Format: ;--- Ini file data ---------------------------------------------------------- IniHeader db 'AGC231' IniAttrib: ;--- Information line colors ------------------------------------------------ cCopyRight db 70h ; Copyright string color cFileName db 79h ; File name color cFileSize db 70h ; Color of file size cTxtOutOfs db 74h ; Color for output offset ;--- Status/help line colors ------------------------------------------------ cStLineKey db 74h ; Status line key color cStLineMes db 70h ; Status line message color cStLineGray db 78h ; Status line message grayed color ;--- Input line colors ------------------------------------------------------ cInpLineTxt db 8Eh ; Input line text cInpLineHex db 8Ah ; Input line hex cEditBG db 70h ; Input line BG ;--- Dialog boxes colors ---------------------------------------------------- cDlgBox db 7Fh ; Dialog box background with frame cDlgHeader db 7Eh ; Dialog box header cDlgText db 70h ; Dialog box text cDlgScrBar db 0Eh ; Dialog box scroll bar cDlgCursor db 9Eh ; Dialog box cursor attr cGrpTxt db 30h ; Group box attr cGrpGray db 38h ; Group box grayed item cGrpHeader db 7Fh ; Group box header cGrpFrame db 70h ; Group box frame cGrpHigh db 7Ah ; Group highlite header ;--- Text view mode colors -------------------------------------------------- ctvAttrOut db 87h ; Attributes for output chars ctvMarkOut db 70h ; Searched value highlight ctvDivider db 8Fh ; Symbols ctvNumber db 8Bh ; Numbers ctvComment db 83h ; Comment string attribut ctvString db 8Dh ; Strings color ;--- Dump view mode colors -------------------------------------------------- chvAttrOut db 87h ; Main color chvByteHexOut db 87h ; Bytes hex out color chvByteAscOut db 87h ; Bytes ascii out color chvCursorAttr db 3Fh ; Cursor color chvMarkOut db 70h ; Searched value highlight chvDivider db 8Fh ; Symbols chvChgHexOut db 8Ah ; Changed bytes color hex out chvChgAscOut db 8Eh ; Changed bytes color asc out chvNewHexOut db 8Bh ; HV new bytes color hex out chvNewAscOut db 8Fh ; HV new bytes color ascii out chvBlkHexMark db 8Eh ; Mark block color hex chvBlkAscMark db 8Ah ; Mark block color ascii ;--- Assembler view mode colors --------------------------------------------- cavAttrOut db 87h ; Attributes for output chars cavCodeField db 8Fh ; Instr code field cavCursorAttr db 3Fh ; Cursor color cavMarkOut db 70h ; Searched value highlight cavDivider db 8Fh ; Symbols cavNumber db 8Bh ; Numbers cavJmpField db 83h ; Jmp field cavAsmField db 87h ; Instr. field cavComment db 83h ; Comment string attribut cavChgHexOut db 8Ah ; Changed bytes color hex out cavNewHexOut db 8Bh ; AV new bytes color cavBlkHexMark db 8Eh ; Mark block color hex cavBlkAscMark db 8Ah ; Mark block color ascii ;--- Help window colors ----------------------------------------------------- bHlpWinAttr db 3Fh ; Help window frame attr bHlpTxtAttr db 30h ; Help text attr bHlpCurAttr db 0Fh ; Help cursor attr bHlpTxtHigh1 db 3Eh ; Highlight group 1 bHlpTxtHigh2 db 3Fh ; Highlight group 2 bHlpTxtHigh3 db 3Ah ; Highlight group 3 bHlpTxtHigh4 db 3Bh ; Highlight group 4 ;--- Other colors ----------------------------------------------------------- cIntro db 04h ; Intro color ScrBarAttr db 83h ; Attr Scroll Bar ;--- Other options ------------------------------------------------15 bytes-- OtherParms: OutMode db 0 ; Output mode 0-TV, 1-HV, 2-AV WrapLog db 1 ; TextWrap 0FFh-Wrap, 01h-UnWrap SearchOpt db 0FFh ; Case sentensivity 01 - On, 0FFh - Off PercentCnt db 0FFh ; ScrollBar 0FFh, Percent counter 01h LFCurPos db 5 ; 0-CRLF,1-CR,2-LF,3-NULL,4-LFCR,5- None,6-AUTO DefSegSize db 16 ; Segment size 10h-16, 20h-32 UndocOper db 1 ; Undoc operation - (not use) bStepValue db 1 ; AsmSr Step 01h-Command, 0FFh-Byte bAreaValue db 1 ; AsmSr Area 01h-File, 0FFh-Block bOffsValue db 1 ; AsmSr Offs 01h-Begin, 0FFh-CurOfs bTypeValue db 1 ; AsmSr Type 01h-Full, 0FFh-Small bAutoHis db 1 ; Auto history 01h-On, 0FFh-Off bCharSet db 0 ; 0-Alt, 1-Win, 2-KOI bCmdOpTab db 7 ; TabSize from BegCmd to operands CalcMode db 1 ; 0-Dec, 1-Hex, 2-Oct, 3-Bin AdvancedOpt db 0FFh ; Search with mask UseCharSet db 1 ; Search with use current CharSet bAVEdBGChar db ' ' ; AV edit cmd BG char bEditEnable db 1 ; Enable editing file after run viewer bTabONFlag db 1 ; Tab symbols on bZoomWinFlg db 1 ; Zooming window enable/disable Note: the defaults are taken from the QVIEW.EXE. ╓─═ QVIEW.EHL ═══─────────────────────────────────────────────────────────────╖ ~~~~~~~~~ See the world coloured ;) Name : QVIEW.EHL Size : variable Type : optional Description : adjustment of options of the viewer on the file's extensions Location : with QVIEW.EXE Record size : 48 bytes ┌──────────┬───────┬─────────────┬────────────────────────────────────────────┐ │ Field │ Size │ Example │ Description │ │ │(bytes)│ │ │ ├──────────┼───────┼─────────────┼────────────────────────────────────────────┤ │FileExt │ 4 │'ASM',0 │File extension │ │OutMode │ 1 │ 0 │Output mode 0-TV, 1-HV, 2-AV │ │WrapFlg │ 1 │ 1 │TextWrap 0FFh-Wrap, 01h-UnWrap │ │LFChar │ 1 │ 6 │0-CRLF,1-CR,2-LF,3-NULL,4-LFCR,5-None,6-AUTO│ │CharSet │ 1 │ 0 │0-Alt, 1-Win, 2-KOI │ │EditFlg │ 1 │ 0FFh │Enable editing file after run viewer │ │TabONFlg │ 1 │ 1 │Tab symbols on │ │TVHighFlg │ 1 │ 1 │Global highlight in TV (01-On,0FFh-Off) │ │TVCommChar│ 5 │';',4 dup (0)│Single-character comments start │ │TVComm1Str│ 6 │ 6 dup (0) │Sinle-line commet first string │ │TVCommBeg │ 6 │ 6 dup (0) │Multi-line commet first string │ │TVCommFlg │ 1 │ 1 │Comments highlight flag │ │TVNumFlg │ 1 │ 1 │Numerals highlight flag │ │TVDivFlg │ 1 │ 1 │Dividers highlight flag │ │TVStrFlg │ 1 │ 1 │"string"-strings highlight flag │ │TVStrFlg1 │ 1 │ 1 │'string'-strings highlight flag │ │Reserved │ 15 │ 15 dup (0) │Reserved │ └──────────┴───────┴─────────────┴────────────────────────────────────────────┘ ╓─═ QVIEW.FMG ═══─────────────────────────────────────────────────────────────╖ ~~~~~~~~~ 1. Configuration file: Name : QVIEW.FMG Size : 417 bytes (01A1h) Type : optional (the defaults are used if absent) Description : file panel (manager) options override Location : with QVIEW.EXE 2. Format: ;--- Configuration options ------------------------------------------------ FmgHeader db 'AGC250' ; Header bfimaSysFileColor db 0FFh ; Highlight Sys,Hid,SysHid files (0FFh - Off, 01h - On) bfimaSysDirColor db 0FFh ; Highlight Sys,Hid,SysHid directory (0FFh - Off, 01h - On) bfimaExecToBegin db 1 ; Executable files to begin (0FFh - Off, 01h - On) bSortCurPos db 2 ; Sorting method (0-Unsorted,1-By name,2-By extension,3-By size,4-By Date&Time) bfimaPanelMode db 0 ; Panel show mode (0-Brief, 1-Full) ;---Highlights group extension -------------------------------------------- ; Format: 64 bytes per group, 4 bytes per extension, all unmeaning bytes ; should be filled with zero. ; bfimaHighExec db 'bat',0,'com',0,'exe',0,52 dup (0) bfimaHighFiles1 db 'pas',0,'asm',0,'inc',0,'c',0,0,0,'cpp',0,44 dup (0) bfimaHighFiles2 db '.',0,0,0,'doc',0,'txt',0,'ctl',0,'diz',0,'ini',0,'cfg',0,36 dup (0) bfimaHighFiles3 db 'dbf',0,'wkz',0,'wks',0,'123',0,'wk',0,0,44 dup (0) bfimaHighFiles4 db 'tmp',0,'$$$',0,'bak',0,52 dup (0) bfimaHighFiles5 db 'pcx',0,'bmp',0,'pic',0,'gif',0,'rle',0,'ico',0,'jpg',0,36 dup (0) ;--- File panel colors ---------------------------------------------------- cfpWindow db 1Bh ; Window color cfpGreed db 1Bh ; Greed color cfpPath db 1Eh ; Window header (path to directory) color cfpTitle db 1Fh ; Column headers color cfpFiles db 1Fh ; File color cfpFileMark db 1Eh ; Marked files color cfpCursor db 07h ; Bar cursor color cfpFileInfo db 1Eh ; Full info about file color cfpScrlBar db 07h ; Scroll bar color cfpDirectory db 1Ah ; Directory color cfpHidden db 17h ; Hidden files color (if bfimaSysFileColor==1) cfpSystem db 1Bh ; System files color (if bfimaSysFileColor==1) cfpHidSys db 13h ; Hidden&System files color (if bfimaSysFileColor==1) cfpDirHidden db 17h ; Hidden directory color (if bfimaSysDirColor==1) cfpDirSystem db 1Bh ; System directory color (if bfimaSysDirColor==1) cfpDirHidSys db 13h ; Hidden&System directory color (if bfimaSysDirColor==1) ;--- File highlighting colors --------------------------------------------- cfpFileExec db 1Bh ; Executable files color cfpFileHigh1 db 13h ; Highlight group 1 color cfpFileHigh2 db 12h ; Highlight group 2 color cfpFileHigh3 db 15h ; Highlight group 3 color cfpFileHigh4 db 14h ; Highlight group 4 color cfpFileHigh5 db 11h ; Highlight group 5 color ;--- End configuration options -------------------------------------------- ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Help file (QVIEW.HLP) ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ The help file is a plain cp866 text file and contains a text appeared on [F1] key press in the viewer. The text is divided into the topics. Every topic is started with its identifier [xxxx], where xxxx is the topic number. The last topic [!END] is always empty. The number of strings in each topic is limited up to a 100, the superfluous strings are ignored. The string length is limited up to a 70 symbols, the superfluous symbols are also ignored. For the better perception the colour highlight is applied. There are five highlight groups from 0 to 4, where the first (0) colour is the basic one for the help text output. To appoint the colour an '!x' combination is used, where x is the group number. The new colour setting, the space symbol and the end of the string are reset the current colour setting to the new or the basic one. The help file is optional as well as the any topic in it. You may remove some topics or the whole file if you want to, but note that some control keys are described only in the help file. So, you may include everything you want to the topics. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ User character table redefining file (QVIEW.CHR) ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Now you can easily create your own code table in addition to the default ones. These tables are stored in the QVIEW.CHR file. Q-Setup utility is supplied to make it easy to create and edit your own charcter table definition file. You're just to create plain text file with the recode definitions and compile it then with the help of Q-Setup. Please refer the q-setup.doc file for the details. ╓─═ QVIEW.CHR ═══─────────────────────────────────────────────────────────────╖ ~~~~~~~~~ Name : QVIEW.CHR Size : 1071 bytes Type : optional Description : user-defined character tables support Location : with QVIEW.EXE ┌──────────┬──────┬─────────────┬────────────────────────────────────────────┐ │ Field │ Size │ Data │ Description │ │ │(byte)│ │ │ ├──────────┼──────┼─────────────┼────────────────────────────────────────────┤ │Header │ 6 │'AGC242' │ Version identifier │ │CharSetCnt│ 1 │ 1..4 │ The number of code tables in file │ │TableName1│ 10 │ table name │ The 1st table name │ │TableName2│ 10 │ table name │ The 2nd table name │ │TableName3│ 10 │ table name │ The 3rd table name │ │TableName4│ 10 │ table name │ The 4th table name │ │TableData1│ 256 │ 1st table │ 1st table │ │TableData2│ 256 │ 2nd table │ 2nd table │ │TableData3│ 256 │ 3rd table │ 3rd table │ │TableData4│ 256 │ 4th table │ 4th table │ └──────────┴──────┴─────────────┴────────────────────────────────────────────┘ Notes for the fields format TableData1..TableData4: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Redefinition is available for the second half of the ASCII table only (ASCII 128..255). 2. Fist 128 bytes: characters from the current code table accorded to the ones of the redefined table, with codes in range of 128..255. 3. Second 128 bytes: vise versa. E.g.: win2ansi DB 176,177,178,179,180,181,182,183 ;128 DB 184,185,186,187,188,189,190,191 ;136 DB 192,193,194,195,196,197,198,199 ;144 DB 200,201,202,203,204,205,206,207 ;152 DB 208,209,210,211,212,213,214,215 ;160 DB 216,217,218,219,220,221,222,223 ;168 DB 240,241,242,243,244,245,246,247 ;176 DB 248,249,250,251,252,253,254,255 ;184 DB 128,129,130,131,132,133,134,135 ;192 DB 136,137,138,139,140,141,142,143 ;200 DB 144,145,146,147,148,149,150,151 ;208 DB 152,153,154,155,156,157,158,159 ;216 DB 160,161,162,163,164,165,166,167 ;224 DB 168,169,170,171,172,173,174,175 ;232 DB 224,225,226,227,228,229,230,231 ;240 DB 232,233,234,235,236,237,238,239 ;248 ansi2win DB 192,193,194,195,196,197,198,199 ;128 DB 200,201,202,203,204,205,206,207 ;136 DB 208,209,210,211,212,213,214,215 ;144 DB 216,217,218,219,220,221,222,223 ;152 DB 224,225,226,227,228,229,230,231 ;160 DB 232,233,234,235,236,237,238,239 ;168 DB 128,129,130,131,132,133,134,135 ;176 DB 136,137,138,139,140,141,142,143 ;184 DB 144,145,146,147,148,149,150,151 ;192 DB 152,153,154,155,156,157,158,159 ;200 DB 160,161,162,163,164,165,166,167 ;208 DB 168,169,170,171,172,173,174,175 ;216 DB 240,241,242,243,244,245,246,247 ;224 DB 248,249,250,251,252,253,254,255 ;232 DB 176,177,178,179,180,181,182,183 ;240 DB 184,185,186,187,188,189,190,191 ;248 Distributed qview.chr file contains the Windows 1251 tables. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▀▄▀ Control keys ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ All keys and its descriptions available in the current mode are listed in the help file. Just hit [F1] to call it when in QView. To get the list of all QView control key simply remove all control symbols from the QVIEW.HLP to get a plain MS-DOS text file. But we recommend that you keep the copy of the original QVIEW.HLP because of the colour cacophony. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ Mouse support ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Generally the viewer has a full mouse support, except a few seldom-used dialogues. As I see, there won't be any cardinal changes. Always use the left mouse button. On the right one there is a mark-line (ruler) a`la DosNavigator Editor. After start the mouse cursor is always placed in the left top corner. So, a few notes about the mice ;) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Status line ~~~~~~~~~~~ At the status (information) line the left mouse button click implements: ─────────────────────────────────────────────────────────────────────────────── [] Filename.ext YYYYYYYY xxxxxxxx_ 12■-5----▐ 00 I ▐ QView 2.60▐ AGC Products ─────────────────────────────────────────────────────────────────────────────── ├┘ └─────────┬┘ └──┬───┘│ │└───┬───┘│ ├┘ Exit from │ Jump to │ │ │ │ Mode change the viewer │ offset │ │ │ │ between (Similar to │ in HV,AV │ │ │ │ TV, HV, AV ESC key) │ (Similar │ │ │ │ (Similar to: Enter,F4) │ to F5 key)│ │ │ └───────────┐ ┌────────┘ ┌────────────────┘ │ │ │ │ │ ┌───────┘ │ │ File panel Call Save cur. Go to the Return from jump call BaseOfs position pointed in AV (Similar (Alt-F6) dialog to the bookmark to Shift+'0') (Ctrl+F2) BookMarks (Similar (Alt+'+') to Alt+'1'... Alt+'9') TV mode ~~~~~~~ In the window of viewing the left mouse button click is: 1. In the first column: scrolls text left; 2. In the last column (befor the ScrollBar): scrolls text right; 3. In the top half of screen: scrolls text one line up; 4. In the bottom half of screen: scrolls text one line down. HV mode ~~~~~~~ In the window of viewing the left mouse button click is: 1. Scrolls up, down, left or right according to the cursor position, increases/decreases file offset; 2. Switches between the hex/ASCII input when the edit mode is on. AV mode ~~~~~~~ In the window of viewing the left mouse button click is: 1. Scrolls up, down, left or right according to the cursor position; 2. Switches between the hex/ASCII input when the edit mode is on. 3. Traces the jump/call, etc. command when clicked on (1)...(9). ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ .CRK-files support ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ 1. All changes made could be saved in .CRK file with [Shift]+[F9]. 2. Function of upgrade the current file with the crack file information - [Ctrl]+[F8]. Description of the upgrade function: 1. The first dialogue requires the base address of crack. It is only needed in case to change the base address stored in crack file. The address you put here becomes the base (first) address, and all the other crack addresses are changed by the required offset automatically. 2. The second dialogue requires the crack file name. Notes: 1. The crack file format is fixed!!! It must include the crack only, i.e. the strings like this: '12345678: 12 34',0Dh,0Ah. First eight characters are the crack address (offset) - use the leading '0' if required; then ':' followed by the Space symbol; then two numbers devided by space: the old byte & the new byte. The every string should be ended with 0Dh,0Ah (Cariage Return and Line Feed characters). 2. Program takes the full crack syntax control. If the string causes the problem, it's number is indicated. The problem may occure in a two cases: either the string syntax is illegal or an old byte in the crack file is not equal to one found in the current file. The byte is changed only if all the requirements are satisfied. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ The comments for the instructions in AV support ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Viewer has the assembler instruction commenting system in AV view mode. There're up to 1000 comment lines of 58 characters each could be handled (of course, all 58 characters could be used in 132*xx video modes only). This sys- tem works very simply - all comments with the address dependencies are stored in the file. All operations with this file are produced automatically. You are only to read your own comments. So, go on - make your comments! The file with the comments gets the same as the viewed file, and the extenxion '.CMT', so we do not recommend that you're comment this file by itself. Well, the system is still crude - we wait for responses... Control: Alt+E insert the comment for the current instruction (line) Alt+Left jump to the previous comment Alt+Right jump to the next comment The sequence of transitions between the comments is depended on the order comments were entered to the file, not on the addresses of the commands. ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ Editing of a file in a text mode (TV) ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ You can edit textual files in a TV mode. The editor works "on-fly", i.e. all changes you made are stored in a file immediatly. Length of a line is now limited to about 255+ScreenSize symbols, though to the editor takes no care of it, i.e. it will also work with lines of greater length, but the positioning to end of a line will not be correct on long lines. As soon as possible I'll solve this problem. All base operations are supported: insert/overwrite; deletion of a sym- bols, lines, symbols up to the end of a line; block operations such as: mark, delete, store in the buffer, insert from the buffer, unmark. The last stored block is kept in the catalogue, in which qview.exe is, in a file qview.blk. A block could be inserted inspite of whether it has been marked or not. If no block currently marked the data will be taken from the qview.blk file (if any). All block operation operates with a blocks up to ~64Kb. (Actually, the length of the block depends on the size of the buffer: if there was no sufficient amount of memory at start of QView, maximal length of the block could be less than 64Kb). The editor provides the current LineFeed and Char.Set support, unlimited file length and strings number within. The only one pity thing is that a file updates immidiatly when you change some byte, so that the large files will de- crease the work speed especcially when you're in the beginning of such a file. So you should think to use some caching program. Under the Windows 95 we have not observed any problems with the work speed. Think, I should notice that all other options of viewing such as Wrap/Un- wrap, Tab On/Off, etc. are also influent on the editor since it's not an inde- pended module of QView, but the superstructure over the TV mode only. So take it easy if the next character is suddenly placed on the next line when the Wrap mode is on. Just set all the options correctly. And the last, but not least. The text editor and full-file editing mode are the different procedures and works independedly! The text edit mode could be switched on/off by the [F3] button. Keys of the editor: Ins insert/overwrite mode switch Del,BS delete a character Ctrl+Y delete a current string Alt+Y, Ctrl+K delete all characters right (to the end of line) Shift+Up, Shift+Down, Shift+Left, Shift+Right, Shift+Home, Shift+End, Shift+PgUp, Shift+PgDn mark a block Ctrl+Del delete a block Ctrl+Ins store a block in the buffer Shift+Ins paste a block from the buffer Alt+U unmark marked block ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ Extra system functions ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ■ The system time is shown when [Shift] is pressed (TV,HV,AV) ■ The system date is shown when [Ctrl] is pressed (TV,HV,AV) ■ Text strings counter (current linefeed depended) - [Alt]+[C] (TV) ■ The strings dump output to a file in the TV mode with [Shift]+[F3] ■ The current screen output to a file with [Alt]+[P] (TV,HV,AV) ■ In the TV mode you may save the current file recoded to DOS encoding. Use [F9] key. N.B. Do not save the file with the same name! ■ The user (DOS) screen is show with [Alt]+[F5] - UserScr (TV,HV,AV) ■ Edit mode on/off with [Alt]+[F3] plus the setup setting (HV,AV). ■ 'Tabulation symbol support ON/OFF' in TV mode with [Shift]+[F2]. (We recommend that you use tabulation off in TV mode with the Wrap mode on - the scrolling of long lines is much faster in that case; binaries especially). ■ Clear string hotkey in the line editors - [Ctrl]+[Y]. ■ File panel (file manager) on OpenFile ([Alt]+[F6]). ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ Command-line options and start-up ▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ 1. Program start-up ▄ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ Usage: qview.exe [<filename.ext>] [keys] Keys: /mt - force text view /md - force dump view /ma - force asm view /r - read only mode ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ ▐▄▀▄ A lot of thanks ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▌ ░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░▒▓█▓▒░ Special thanks to Dmitry Gazko AKA Dr.Khumen for the first QSetup and for the questions discussion. Also a lot of thanks to Igor Naryshkin for the new Q-Setup, creation and control over the QVIEW.SUPPORT echo-conference, bug-hunting and for the different questions discussion. ... for everyone sent me a comments, bug-reports and proposales. Sorry if someone missed. Send me a mail... :) Alex Churakow Alex Jivitca Alex Morshchakin Alex Pakhotin Alex S Aganichev Alex Semenyaka Alex Silman Alex Zatvornitski Alex Zemlaykov Alexander Alferowich Alexander Fedenko Alexander Kron Alexander Shursha Alexander Skorodumov Alexander Zacepin Alexandr Gazko Alexey Gogotz Alexey Monastyrenko Anatoly Rodnikov Anatoly Soroka Andrej Zverev Andrew Lazarchuk Andrew Tkachenko Andrey Alekseyev Andrey Prokopishin Andrey Ryabuhin Andrey Siniakov Andy Knyazev Andy Semenov Andy Shevchenko Artem Danilenko Bohdan Troshchinskiy Boris Baskakov Boris Felikson Danil Shubin Dennis B. Kobernic Dmitry Belyi Dmitry Fedotov Dmitry Gazko Dmitry Jemerov Dmitry Shevchenko Dmitry Zavalskov DoubleMan Eugene Lisovy Evgeniy Graznov F0RESTER Igor Dyatlov Igor Naryshkin Igor Pronin Igor Smirnov Igor Vasilchikov Ilgar Veliev Ilia Levin Ilja Evseev Ilya Aniskovets Ilya Kuznetsov Ivan Kuznetsov Kirill Joss Kirill Kutejnikov Kolya Nesterov Konstantin Boldyshev Kostya Volkov Leonid Shirmanov Max Ivanov Max Popov Maxim Shashkov Maximilian Gvozdev Michail Danshin Milan Kosina Misha Ivanov Nikolay Sidoroff Oleg Rombakh Paul Sokolovsky Pavel Chuvanov Pavel Popov Peter Hubinsky Peter Sobolev Peter Teslenko Professor Nimnull Rick Murray Roman Papusha Rusty Davis Sanya Tankeev Sergej Miroshnichenko Sergey Chabunin Sergey Chehuta Sergey Monin Sergey Ovcharenko Sergey Pliusnin Sergey Podolanchyk Sergey Samoyloff Sergey Savchenko Sergey Stukov Sergey Temrezov Sergey Volkov Sergey Zabaryansky Slav Kuznetsov Slava Tarasjuk Stanislav Davidov TERMINATOR Timur Chuzhinov Tony Mantana Vadim Bodrov Vadim Dolganov Vadim Yoockin Vano Sergeev Vasily Idanov Victor Chuchupal Victor Frolov Victor Shantar Viktor Ostashev Vladimir Gordeev Vladimir Kvitnitskiy Vladimir Ruzin Vladimir Soshkin Vovec Tokmakov Wadim A. Sigalov Wowik Mikolenko Yuri Baranow Yuri Onufreeshin Yuri Pohilko Yury Urbanovitch basil vorontsov damir bikmuhametov the unforgiven NB: the nobody's desires and offers aren't forgotten - if still not realized, they are waiting for the time to come. All known bugs I kill as soon as found them in the ~1.2 Mb of assembler source code. ;) ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ P.S. Any comments, proposals, bug-reports, interesting ideas are welcome! Thank you for your support. With Best Regards, Alexandr Gazko AKA 2:5030/445@FidoNet 2:5030/445.4@FidoNet 2:5030/282.4@FidoNet 2:5030/317.4@FidoNet 02:00:00, 26-06-98 AGC ╓─ ║ Translated by Igor Naryshkin. ║ Please e-mail me any corrections on this documement at: ║ Fidonet: 2:5030/482, ║ Internet: naryshkin@geocities.com, niva@f482.n5030.z2.fidonet.org ╙─ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓╬╬╬╬╬╬▓▓╬╬▓▓╬╬▓▓╬╬╬╬╬╬▓▓╬╬╬╬╬╬▓▓▓▓░░ ▓▓▓╣▒▒▒▒▒▒▓▓╬▒▓╬▒▒▓▓▒╬╬▒▒▒▓▓▒╬╬▒▒▒▓▓▓░░ ▓▓▓╬╬╬╬╬╬▓▓▓▓╬╬▓▒▓▓▓▓╬╬▒▓▓▓▓▓╬╬▒▓▓▓▓▓░░ ▓▓▓╬▒▒▒▒▒▒▓▓╬▓▒╬▓▓▓▓▓╬╬▒▓▓▓▓▓╬╬▒▓▓▓▓▓░░ ▓▓▓╬╬╬╬╬╬▓▓╬╬▒▓╬╬▓▓╬╬╬╬╬╬▓▓▓▓╬╬▒▓▓▓▓▓░░ ▓▓▓▓▒▒▒▒▒▒▓▓▒▒▓▓▒▒▓▓▒▒▒▒▒▒▓▓▓▓▒▒▓▓▓▓▓░░ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓░░ ▓▓▓▓▓ Yes ▓▓▓▓▓▓ No ▓▓▓▓▓░░ ▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▓▓▓░░ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓░░ ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░